Tired of using five different products to keep your pool in perfect condition? The Quimiclor PS 5 Effects revolutionizes pool maintenance with an all-in-one solution: a single slow-dissolving tablet that combines disinfection, algae removal, flocculation, scale protection, and pH stabilization continuously and effortlessly.
Specially formulated for pools with hard or difficult water — where other products fail — Quimiclor PS 5 Effects keeps the water crystal clear, balanced, and free of contaminants throughout the season, with minimal time commitment.
✅ Why choose Quimiclor PS 5 Effects?
- 5 actions in 1 tablet: Disinfectant + Algaecide + Flocculant + Antiscale + pH Stabilizer — no need for additional products for routine maintenance.
- Slow and continuous dissolution: Gradually releases chlorine for 5-7 days, ensuring constant disinfection without peaks or drops.
- Especially for hard water: The antiscale component prevents scaling on walls, bottom, and equipment — ideal for areas with calcareous water.
- Crystal clear water guaranteed: The flocculant action groups suspended particles so the filter can effectively remove them.
- Automatically stabilizes pH: Extends chlorine effectiveness by keeping pH in range without frequent corrections.
- High concentration of available chlorine: 78-83% active chlorine per tablet — maximum performance per unit.
- Easy application: Place tablets in the skimmer or pre-filter and forget about it for a week.
📊 Technical Properties
| Feature | Value |
|---|---|
| Appearance | Cylindrical white tablet with blue speckles |
| Main component | Trichloroisocyanuric acid 89-92% (CAS: 87-90-1) |
| Other components | Aluminum sulfate, copper sulfate, boric acid |
| Available chlorine content | 78 – 83% |
| pH (1% solution) | 2.7 – 4 |
| Diameter / Height | 75 mm / 28 mm |
| Weight per tablet | 250 g |
| Recommended free chlorine | 0.5 – 2 mg/L |
💧 Dosage Guide (Step by Step)
⚠️ Important: Do not use with other chemicals — risk of chlorine gas release. Not suitable for diatomaceous earth or cartridge filters. Do not use with inline feeders. Wear gloves and protective eyewear.
Standard dose:
- 1 tablet of 250 g per 35 m³ of water
- Place in the skimmer after cleaning the filter, or in the pump pre-filter for faster action
- Check every 5-7 days and replenish as consumed
- Maintain free chlorine between 0.5 and 2 mg/L
For very hard water (initial boost):
- Add 2 L of liquid Quimical PS per 50 m³ at the beginning of the season to boost the antiscale effect
📌 Indicative doses. Adjust according to temperature, sun exposure, number of swimmers, and water characteristics.
🛡️ Safe Handling
- Wear gloves and protective eyewear at all times
- Do not mix with other chemicals — risk of chlorine gas
- Incompatible with: oxidizing agents, acids, alkalis, quaternary ammonium derivatives, peroxides, and cationic surfactants
- Not suitable for: diatomaceous earth filters, cartridge filters, or inline feeders
- Keep out of reach of children, stored under lock and key
- After finishing the container, rinse it three times and pour the wash water into the pool
- Waste: dispose of at a clean point (domestic use) or authorized manager (professional use)
🛒 The Easiest Maintenance on the Market — Order Today
One tablet. Five effects. A week of peace of mind. With Quimiclor PS 5 Effects, simplify your pool maintenance without sacrificing maximum effectiveness. Add it to your cart now and receive it in 24-48 hours.
📦 Available in 5 kg tubs for domestic use and professional formats. Inquire about volume pricing.
🔗 Complete Your Pool Treatment
For special situations or shock treatments, combine Quimiclor PS 5 Effects with:
- Alboral PS Rapid Granulated — Ultra-fast shock chlorine for green water or season start
- Catigene PS — Non-foaming algaecide with flocculant effect for weekly reinforcement
- - Liquid pH E15 — pH reducer for precise adjustment with a dosing pump
- pH and chlorine test kit — Measure accurately before each treatment